Rocom Doortello Home Podręcznik Użytkownika Pobierz pdf (Strona 20)

User guideDoortello HomeIssue 1.00

Page 20

*#8 OK tone #4025 OK tone 050 OK tone 025 OK tone 400

OK tone

Please note!

If you want to program a ring back tone with a single make and break you

have to use only the values make 1 and break 2. The values break 1 and make

2 have to have in this case a value of 000.

Number of rings

If the unit calls a telephone which doesn’t answer within a programmed

number of calls the connection will be automatically disconnected. As default

the number of call before disconnection is 7. To change the number of calls

before disconnection, please follow this procedure:

*#8 OK tone #5 {number of calls} OK tone

You can use values from 02 to 99.

Example:

n You want that a extension should be called for 18 times before the call is

automatically disconnected: Input:

*#8 OK tone #518 OK tone

Please note!

The device will detect the ring back tones and not the real rings to the

telephone. Some switches can send ring back tones which don’t correspond

exactly to the ring back tones sent.

Please note!

The number of call is also limited by the maximum connection time

programmed. If you want to increase the ring time (i.e. to use a call diversion

feature) you might also have to increase the maximum connection time

programmed.

Tone tables

To make the tone programming easier the system has 30 predefined tone table

which can beloaded on request. Loading the table all the specific busy and ring

back tone are setted at once. A single programmation of each tone is then no

more necessary. As default the table 01 is loaded. If you want to change the tone

table please follow this procedure:

*#8 OK tone #9 {table number} OK tone

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Brak uwag

Rocom Doortello Home Podręcznik Użytkownika Strona 20